SpecificationsPower

OutputMinimum sine wave continuous average power output is:

1,200 watts into 2 ohm load

1,200 watts into 4 ohm load

1,200 watts into 8 ohm load

Output Load Impedance

2, 4 or 8 ohms

Rated Power Band

20Hz to 20,000Hz

Total Harmonic Distortion

0.005% maximum harmonic distortion at any power levelfrom 250 milliwatts to rated power, 20Hz to 20,000Hz

Dynamic Headroom

2dB

Frequency Response

+0, -0.25dB from 20Hz to 20,000Hz

+0, -3dB from 10Hz to 100,000Hz

Input Sensitivity (for rated output)

2.5 Volt Unbalanced

5 Volt Balanced

Signal To Noise Ratio (A-Weighted)

120dB below rated output, Unbalanced

124dB below rated output, Balanced

Intermodulation Distortion

0.005% maximum, if the instantaneous peak power output

does not exceed twice the rated power output for any com-

bination of frequencies from 20Hz to 20,000Hz.

Wide Band Damping Factor

Greater than 40

Input Impedance

10,000 ohms

Power Guard

Less than 2% THD with up to 14dB overdrive at 1,000Hz

Power Requirements

100 Volts, 50/60Hz at 15 Amps

110 Volts, 50/60Hz at 12.5 Amps

120 Volts, 50/60Hz at 12 Amps

220 Volts, 50/60Hz at 7.5 Amps

230 Volts, 50/60Hz at 6.5 Amps

240 Volts, 50/60Hz at 6.5 Amps

Standby: 0.5 watts

Note: Refer to the rear panel of the MC1.2KW for the correctvoltage.

Overall Dimensions

Width is 17-3/4 inches (45.09cm)

Height is 12-5/16 inches (31.27cm) including feet

Depth is 22 inches (55.88cm) including the Front Panel andCables

Weight147 pounds (66.7 kg) net, 172 pounds (78.0 kg) in shippingcarton

Shipping Carton Dimensions

Width is 31 inches (78.74cm)

Depth is 28 inches (71.12cm)

Height is 17-1/4 inches (43.82cm)